How much does a Control4 home automation system cost in Kansas City?

A complete Control4 system for a typical Kansas City home ranges from $18,000 for essentials (lighting + audio control) to $175,000+ for whole-home automation including video distribution, security integration, and concierge programming. IntegrateIT, a Platinum-tier Control4 dealer based in Overland Park, provides fixed-price written proposals after a no-cost site walk.

Who is the best Control4 dealer in Overland Park?

IntegrateIT LLC is a Platinum-tier Control4 Dealer serving the Kansas City metro. Founded in 2021 by Daniel and Moran Alon as a family business. Also holds authorizations from Crestron, Lutron, Sonance, and Wisdom Audio. Located at 15108 Glenwood Ave, Overland Park, KS 66223. Phone: (913) 804-7575.

How long does a home theater installation take?

Typical residential home theater projects run 4 to 8 weeks from contract signing to final calibration, depending on architectural complexity and equipment lead times. The site walk and proposal typically take 1 to 2 weeks before construction begins.

What is the difference between Control4 and Crestron?

Both are flagship home automation platforms. Control4 emphasizes ease of dealer programming and end-user app control across mainstream-luxury homes. Crestron offers deeper customization and is typical in concierge-tier homes with bespoke programming requirements. IntegrateIT is authorized for both and recommends based on the specific home, budget, and feature requirements.

Do you serve clients outside Kansas City?

Primary service area is the Kansas City metro. We also take concierge-tier projects in South Florida (Boca Raton, Naples, Miami metro). For other regions, we refer to trusted partners in the CEDIA network.

★Service · Overland Park

Smart lighting installer · Overland Park.

IntegrateIT installs Lutron + Control4 smart lighting across Overland Park, KS — based at 15108 Glenwood Ave in Overland Park. 80+ Overland Park installs since 2021 across all three Lutron tiers (Caseta wireless DIY, RA3 whole-home retrofit, HomeWorks QSX flagship). Lutron Certified Installer + Platinum-tier Control4 dealer + Crestron Authorized — which means we recommend the right platform for YOUR home + budget, not the one we\'re only trained to sell. Daniel walks every project. Call (913) 804-7575.

What\'s different about how we install smart lighting

Lutron Certified Installer + Platinum Control4. Both platforms in-house. Retrofit or new construction, single-stack (Lutron only) or two-stack (Lutron + Control4) — we design what your home needs, not what we\'re only trained to upsell.
Local — same zip code as you. Based at 15108 Glenwood Ave, Overland Park 66223. Most service calls happen within 24h; new project consultations within a week.
Custom keypad engraving. HomeWorks installs come with engraved keypads ("Welcome", "Goodnight", "Movie", "Entertain") — labels are CNC-routed at the Lutron factory, not stuck-on labels that fade.
Lifetime priority support. When you call 4 years post-install with a question, we answer. 5-year workmanship warranty on the wiring + install; lifetime priority service queue placement.

Common questions

How much does smart lighting cost in Overland Park?

A starter Lutron Caseta install (8-12 dimmers + bridge + 2-3 keypads) runs $3,800-$7,500 for a typical Overland Park 3,000-5,000 sqft home. A whole-home Lutron RA3 install (24-36 zones, 6-12 keypads, motorized shade integration) runs $14,000-$32,000. A flagship Lutron HomeWorks QSX install on a 5,000-10,000 sqft home with full keypad replacement, motorized shades, custom engraving, Crestron / Control4 integration runs $45,000-$115,000. The system tier (Caseta < RA3 < HomeWorks) is the largest cost driver; second is zone count.

Lutron Caseta vs RA3 vs HomeWorks — which is right for my Overland Park home?

Caseta is the wireless DIY tier — fine for an apartment or renter who wants smart bulbs without committing to in-wall hardware. RA3 is the wireless mid-tier — right for a 3,000-5,000 sqft home that wants whole-home control without ripping into walls (uses RF dimmers replacing your existing switches). HomeWorks QSX is the hardwired flagship — right for $1M+ homes + new construction, scales to 200+ zones, custom programming + factory keypad engraving + Crestron / Control4 integration. Most Overland Park luxury installs land at RA3 + HomeWorks; Caseta is fine for guest houses + outbuildings.

Can I add smart lighting to my existing Overland Park home, or only new construction?

Both. Lutron RA3 + Caseta are designed for retrofit — the wireless dimmers replace your existing switches with no new wiring. Lutron HomeWorks works both ways: new construction installs are simpler (we run the wiring during framing), but retrofit installs are common too — we run cabling through existing chases / attic / basement, terminate at a HomeWorks processor in the mechanical room. 60% of our Overland Park lighting projects are retrofits in existing homes; 40% are new construction.

How does smart lighting integrate with my Control4 / Crestron / Sonos system?

Native integration on every major platform. Lutron is the de-facto lighting standard for the AV-integration industry, so Control4 + Crestron + RTI + Savant + Josh.ai + Sonos + voice assistants all talk to Lutron natively. Scenes work cross-platform ("Movie" → Lutron dims theater lights AND Sonos pauses upstairs music AND Control4 lowers the screen). The two-stack architecture (Lutron + Control4) is actually the recommended setup for $1M+ Overland Park homes — Lutron does lighting + shades better than any control platform, Control4 does audio + video + climate better than Lutron.

How long does a smart-lighting install take in Overland Park?

Caseta retrofit: 1-3 days depending on switch count. RA3 retrofit: 4-8 days for a whole-home install (one electrician + one programmer). HomeWorks new construction: 2-4 weeks across multiple phases (rough-in during framing, processor install at trim, keypad install + commissioning at finish). HomeWorks retrofit: 3-6 weeks (cabling chases add labor). Programming + commissioning happens in the last 3-5 days regardless of system tier.

Who installs smart lighting in Overland Park?

IntegrateIT (Overland Park, KS) installs Lutron + Control4 smart lighting across Overland Park, Leawood, Mission Hills, and Prairie Village. 80+ Overland Park installs since 2021 — 25+ HomeWorks projects, 35+ RA3 projects, 20+ Caseta projects. Lutron Certified Installer + Platinum Control4 dealer + Crestron Authorized. Based at 15108 Glenwood Ave, Overland Park. Phone: (913) 804-7575.

Most homes (and most boardrooms) land 2–3 of these in one project. Worth a read.

Walk the house. Spec the keypads. Quote in writing.

Plan my project (913) 804-7575

Also serving across the metro

We install in every wealthy neighborhood between Loch Lloyd and the Plaza — and every estate from Mission Hills to Lake Quivira. Pick your neighborhood for the locality page.

Written by Daniel Alon, founder of IntegrateIT LLC and a Platinum-tier Control4 dealer with 20 years in IT and AV integration. Authorized Control4, Crestron, Lutron HomeWorks, Sonance, Wisdom Audio dealer. Overland Park, KS. Updated 2026-05-20.